Get 10% extra OFF on Porto Summer Sale - Use PORTOSUMMER coupon - Shop Now!

Single Finger Leaves – Cannabis Re-Vegging

mutated cannabis leaves single finger
Posted by: Samuel Thomasino Category: Plant Problems Comments: 0

Single Finger Leaves – Cannabis Re-Vegging

Re-vegging takes place when cannabis plants in the flowering stage revert back to the vegetative stage. Cannabis plants that are re-vegging often grow strange mutated leaves or smooth single finger leaves with no serrations.

Some growers benefit by taking clones from flowering plants or by harvesting them twice but otherwise, re-vegging should be prevented.

Cannabis is an annual plant enduring unique stages in its life cycle; germination, vegetation, and flowering. Upon being harvested, the plant and its genetics give no further benefits unless cuttings from it are taken during the vegetative phase.

If a grower wants to recover genetics during the flowering period they may intentionally re-veg the plant but what if accidental re-vegging takes place?

In this guide, you will learn about cannabis re-vegging and the perks and downsides of it

What Causes Cannabis Plants to Grow Smooth Leaves?

Most cannabis plants, with the exception of autoflowering seeds, are photoperiod strains requiring long nights to trigger the flowering phase and produce buds.

During the flowering phase, indoor plants normally receive twelve hours of uninterrupted darkness. If they receive light during their twelve hours of darkness they will respond by re-entering the vegetative phase and begin to grow mutated leaves that are often one finger fan leaves. This situation can occur from light sources as weak as the LED from a fan.

So to sum up, re-vegging occurs when plants receive light during their 12-hour dark cycles, a few interrupted nights or a small leak of light and it can take place.

Cannabis plants may accidentally re-veg due to one of these common issues:

  • Light leaks during the flowering stage are a sure-fire way for a plant to re-veg. Whether it be a light leak from a window that penetrates into the grow room or the grower interrupting the dark cycle by turning a light on, both situations confuse plants and cause them to restart the re-vegetative phase all over again.
  • Timers not working properly are another occurrence that can cause plants to re-vegetate. If a timer is not properly working and is giving light to plants when it should not be, they will likely return to the vegetative stage.
  • Planting cannabis outdoors early in the Spring can cause issues as it will flower almost immediately, due to shorter days, but then re-veg once days become longer. Cannabis plants are best plotted outside during mid to late Spring.
  • Exchanging hands or ownership can cause a plant to re-veg as when traded or sold it can be exposed to various different lighting schedules.

What does a Re-Vegging cannabis plant look like

Cannabis plants revisiting the vegetative stage show symptoms that include:

  • Curling leaves
  • Smooth-leaf edges
  • New stems or long leaves
  • Twisted or irregular growth forms
  • One finger fan leaves growing from the main stem (instead of seven to nine finger leaves)

Example #1

example 1 plant revegging

This plant was first grown outdoors during Spring and began flowering due to shorter nights. As the season matured, nights grew shorter giving more daylight for the plant.

Due to shorter nights, it re-entered the vegetative stage and grew oddly-smooth leaves from its center stem, as shown above. Single finger leaves began growing from developed buds during the flowering stage which is the main sign a plant is re-vegging.

The keeper of this plant was unaware that briefly turning lights on during dark periods would cause an issue. As such, growers should know plants can re-veg even if given only a few nights of momentary light. Growers should never disturb the plant when it is sleeping!

Example #2

example 2 single point leaves

Take a look at the image above. You will notice leaf edges are smoother than traditional leaves. That is the primary sign of plant re-vegetation.

Example #3

example 3 single finger fan leaves

Directly above is an indoor-grown plant that during the flowering phase and Spring season went outdoors. Once outside in shorter-night dark cycles it immediately re-entered the vegetative stage.

Example #4

example 4 clones

The clones above were taken from a flowering plant and began re-vegging, which as shown, caused odd growth and smooth-edged leaves. As is the case with most plants re-entering this cycle, several single-pointed leaves grew too, which again, is a key indicator that a plant is re-entering the re-vegging phase.

Plants receiving light at nighttime quickly re-veg as their cycle is thrown off which prompts them to begin the process over again. As said above, all growers should keep this in mind while gardening.

Example #5

example 5 smooth leaves

This next plant below received twelve hours of light and darkness following germination which caused small white hairs to develop. The keeper of this plant wanted a bigger plant so changed its light schedule to 18/6 (18 hours of light and 6 hours of darkness), which caused it to re-veg.

Once the light schedule changed, bud growth ceased and single-pointed leaves began to grow. While a few white hairs are still present, it has nearly fully returned to the vegetative stage.

Do Re-Vegging Leaves Look Different?

Leaves may appear differently based on strain and environment. However, growers know when a plant is re-vegging when its leaves appear smoother than normal (No sharp edges to the leave).

There is really no other causing factor that would prompt a plant to grow smooth-edged leaves. Of course, growers should keep watchful eyes on their plants, and as such, should know if any light sources are present at nighttime. Even an oscillating fan or led on a multi-plug socket can be enough to interrupt the plant’s night cycle.

If plants begin exhibiting smooth or singular finger leaves, the grower can be confident that re-vegging is taking place. Light cycles are a crucial re-vegging preventative and should, at all times, be thoughtfully considered throughout harvest lifecycles.

Cannabis plants express re-vegging signs uniquely to the strain so all signs should be closely watched by harvesters.

Can Re-Vegging be Advantageous?

monster cropping

In some cases, cannabis growers purposefully re-veg their plants.

Monstercropping, which is the process of taking a clone from a plant in the flowering phase in order to change its initial growth patterns, is an example of re-vegetation done intently.

To elaborate, Monstercropping encourages growers to re-veg their plants and involves taking clones from a flowering plant and re-vegging them under a 20/4 or 18/6 lighting schedule.

The idea is re-vegged clones produce stalkier plants. This is not normally recommended as it seems to be the recipe for getting hermaphrodites or other issues related to stressing the plant.

Another technique involving this is when a grower purposefully puts the plant back into the vegetative stage in order to grow the same genetics; this is often done by warm-climate, outdoor growers wanting to cultivate a second annual harvest.

Normally though, when growers see the leaves of a plant that is re-vegging, it is an unwelcome sight.

twisted leaves

How to fix the problem

Like always, time is the greatest healer! The grower should firstly fix any light leaks in the grow area. The timer should also be checked to make sure it is not faulty. After this, the plant will need some time to go back into flower.

The leaves will not correct themselves once they have formed and the trimming during harvest is going to be a bit of a nightmare. However, the plant can still produce some quality buds regardless – depending on the genetics that is.

Some strains are much more sensitive to stress so they can hermaphrodite much easier than others. A very unnatural interruption like this can be enough to stress the plant into producing male pollen. Once this happens the plant will pollinate its self and focus on making feminized seeds rather than buds. So the grower should watch carefully for this as it could be time to dispose of the plant and start again if seeds are of no use. The buds will still be smokeable, but if this situation occurs early on in flower then there will be very little bud on offer.

Four Steps to Stop a Cannabis Plant from Re-Vegging

So to sum up, here are four steps to be taken to stop a plant from re-vegging.

  • (Important) Fix any light leaks in the grow area. Any daylight breaking into the space during the plant’s nighttime will cause Re-Vegging or hermaphrodite issues. Even small led lights from plug sockets or fans can be enough to trigger mutated leaves and Re-Vegging,
  • (Important) Check the timer has not malfunctioned and the lights do not come on during the 12 hours of darkness.
  • (optional) Ensure nutrients are low in nitrogen. Veg ratios are always higher in Nitrogen, but for flower, Nitrogen should be much lower. Some growers use MicroBloom in order to give plants extra Phosphorous and Potassium while omitting solutions, such as FloraMicro and FloraGrow, in order to eliminate the presence of nitrogen in the soil. If the grower is using a full set of quality nutrients then there should be separate foods for veg and flower – so adding extra P & K (Phosphorous and Potassium) should not be needed.
  • (optional) Adjusting light cycles from 12/12 to 10/14. Some growers claim this extra two hours of darkness will help reintroduce the flowering phase, but many claim this to be unnecessary.
  • (optional) Trimming all-new vegetative growth. This is often a good idea, but the additional stress could again cause a hermaphrodite issue. The problem the grower has is that these new branches are going to take up the plant’s energy and produce a higher amount of small popcorn buds. This new growth will also be further behind in the flowering phase and will take longer to mature.

What Should a Grower Do About Accidental Re-Vegetation?

There are essentially two options when a plant re-vegs, a grower can:

  • Allow it to fully re-vegetate if they want it in the vegetative stage.
  • Adjust lighting periods, eliminate light sources, and ensure plants receive twelve hours of uninterrupted darkness each day, which returns them to the flowering stage.


Fortunately, with time, patience, and care, cannabis plants can begin to grow normally once again. If a plant begins to re-veg there is no need to panic as growers have pursuable options to revert its cycle.

With some time and adjustments, plants can grow normally again to produce luscious buds beloved by both cultivators and connoisseurs alike.

This is just one of many different cannabis plant problems, follow our blog to learn all about the different problems growers face.

Share this post